International Journal of Nanoparticle Research


Synthesis of Diazine-Based Dendrimer Supported Pd/Co Bimetallic Nanoparticles and Catalytic Activity for Sonogashira Coupling Reactions

Research Article of International Journal of Nanoparticle Research Synthesis of Diazine-Based Dendrimer Supported Pd/Co Bimetallic Nanoparticles and Catalytic Activity for Sonogashira Coupling Reactions Md. Sayedul Islam* and Md. Wahab Khan Department of Chemistry, Faculty of Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka-1000, Bangladesh A moisture-stable diazine-based dendrimer assisted heterogeneous bimetallic Pd/Co nanoparticles (NPs)  was synthesized which showed a simple, profitable and environmentally sustainable operation for the Sonogashira reactions under copper and solvent-free conditions with regained easily and recycled four times without substantial activity loss. Furthermore, the dendrimer was analyzed by IR, 1H NMR, 13C NMR, and elemental analysis whereas the Pd/Co bimetallic NPs was characterized by EDX, TGA & DSC, and XRD techniques. Keywords: Bimetallic nanoparticles (NPs), Diazines; Dendrimer and Sonogashira reaction ...

MHD Mixed Convection Flow of Casson Nanofluid past a Stretching Sheet in the Presence of Viscous Dissipation, Chemical Reaction and Heat Source/Sink

Research Article of International Journal of Nanoparticle Research MHD Mixed Convection Flow of Casson Nanofluid past a Stretching Sheet in the Presence of Viscous Dissipation, Chemical Reaction and Heat Source/Sink K.Govardhan1, G.Narender2* and G.Sreedhar Sarma3 1 Department of Engineering Mathematics, GITAM University, Village Rudraram, Medak Dist.,Hyderabad-502329, Telangana State. INDIA. 2, 3 Department of Humanities and Science, CVR College of Engineering, Mangalpalli, Ibrahimpatnam, R.R.Dist.,Hyderabad-501510, Telangana State, INDIA. This paper focuses on the effect of MHD mixed convection flow of casson nanofluid past a stretching sheet in the presence of viscous dissipation, first order chemical reaction and heat source/sink. The profiles for the velocity, temperature and nanoparticle concentration depends on the parameters Casson fluid parameter β, concentration buoyancy parameter N, Hartman number M, radiation parameter R, Prandtl number Pr, the Schmidt number Sc, Brownian motion Nb, thermophoresis parameter Nt, Eckert number Ec, chemical reaction parameter γ the heat transfer Biot number γ1 and the mass transfer Biot number γ2. The constitute governing partial differential equation of flow, heat and mass transfer on considered flow are converted into nonlinear ordinary differential equations by employing suitable transformations and these transformed equations were solved by the Adam’s Moultan fourth order method with shooting technique. The various numerical tables are calculated and tabulated. Our results have been compared with the results of a previous study and found to be in an excellent agreement. Keywords: Nano Fluid, viscous dissipation, Brownian motion, Thermophoresis, Stretching Sheet, chemical reaction ...

Synthesis of Punica Granatum Fruit Peel Extract Based Silver Nanoparticles and Evaluation of it’s Antimicrobial Activity

Research Article of International Journal of Nanoparticle Research Synthesis of Punica Granatum Fruit Peel Extract Based Silver Nanoparticles and Evaluation of it’s Antimicrobial Activity Vinay C H*, Prakash Goudanavar and Ankit Acharya Department of Pharmaceutics, Sri Adichunchanagiri College of Pharmacy, B.G. Nagara, Karnataka -571 448. The main objective of the present work was to prepare pomegranate peel extract based nano particles by chemical complexation method. Ethanolic extracts of pomegranate peel were prepared by using Soxhlet apparatus and evaluated for phyto-chemical constituents. Qualitative analysis showed that pomegranate peel extract showed positive results for alkaloids, anthraquinones, saponins and terpenoids. The percentage moisture content and pH of the extract was found to be 72% and 3.6 respectively. A zeta potential and particle size of prepared nanoparticles was found in the range of -24.6 to– 34.5 mV and 118.6 nm to 231.7 nm, respectively. These range confirms that obtained particles were in nano range, i.e. <500 nm size. SEM results indicated the formation of nanoparticles and were relatively spherical in shape. Energy dispersive spectrometry (EDS) analysis confirms the presence of AgNPs. Prepared peel extracts based nanoparticle showed promising antimicrobial and antifungal properties. Keywords:Pomegranate peel extract, Qualitative analysis, Nano particles ...

Development and Characterization of Nanoparticle Metal Matrix Composites: (Al 2024-SiC NP)

Research Article of International Journal of Nanoparticle Research Development and Characterization of Nanoparticle Metal Matrix Composites: (Al 2024-SiC NP) Muhammad Arshad Chaudhry1, Liaqat Ali2, Khalid Mahmood Ghauri2,Javed Iqbal2  1Ph.D Research Scholar, Department of Metallurgical and Materials Engineering, University of Engineering & Technology, Lahore, Pakistan 2Professor Dr. Department of Metallurgical and Materials Engineering,University of Engineering & Technology, Lahore, Pakistan Composite materials get an importance in value as an advance materials such as automotive, aerospace, aircraft, defense, medical, marine, sports, recreation and various engineering applications due to their high strength-to-weight ratio, good cast ability and better tribological properties. Al-base 2024 alloy reinforced with SiC micron and nano particles were developed using stir casting technique due to low cast, ease in fabrication, recyclability and isotropic characteristics. The development of Aluminum metal matrix nano composites (AMMNCs) is most considered material for high temperature applications because of their excellent mechanical properties, increase performance and weight saving for more reduction of fuel consumption. The results indicate that Al-SiC composite has improved physical and mechanical properties such as tensile strength, charpy impact strength, brinell hardness, density and porosity percentage. Samples with micron particles and nano particles were developed to compare the properties of both. Microstructures of the samples were studied by means of X-Ray Diffraction and Scanning Electron Microscopy. The elemental composition was also analyzed through Energy Dispersive Spectroscopy. It was found that composites of Al-SiC have better and improved physical properties in nano dimensions. Keywords: Al-SiC development, stir casting, characterization of reinforced samples, optical micrograph, XRD, SEM and EDS ...

Prof. Dr. Alireza Heidari
Full Professor and Academic Tenure of Chemistry & Director of the BioSpectroscopy Core Research Laboratory at Faculty of Chemistry, California South University, USA & President of American International Standards Institute, USA

Dr. Suban K Sahoo
Assistant Professor, Department of Applied Chemistry, S.V. National Institute of Technology (SVNIT) Ichchanath

Dr. Prakash Prajapat
Assistant Professor, Department of Chemistry, Mehsana Urban Institute of Sciences, Ganpat University

Dr Soumya Mukherjee
Assistant Professor, Amity School of Engineering and Technology, Amity University

Dr. Pragati Kumar
Assistant Professor, Department of Nano Sciences & Materials, Central University of Jammu

Dr. Ha, Chang-Sik
Distinguished Professor, Dept. of Polymer Science and Engineering, Pusan National University, Busan 46241, Korea

Dr Nasrallah M. Deraz
Professor, Advanced Nanomaterials Chemistry and Catalysis, National Research Centre, Dokki, Cairo, Egypt.

Dr. Boumediene Haddad
Associate professor (lecturer and Scientific Researcher), Department of Chemistry, Dr. Moulay Taher University

Dr. Azeez Abdullah Barzinjy
PhD (Materials Science), Department of Physics, College of Education, Salahaddin University –Erbil

Dr. Dibya Prakash Rai
Assistant Professor, Department of Physics, Pachhunga University College, Aizawl, Mizoram, India-796001


Manuscript Title: The title should be a brief phrase.

Author Information: List full names and affiliation of all authors, including Emails and phone numbers of corresponding author.

Abstract: The abstract should be less than 500 words. Following abstract, a list of keywords and abbreviations should be added. The keywords should be no more than 10. Abbreviation are only used for non standard and long terms.

Introduction: The introduction should included a clear statement of current problems.

Materials and Methods: This section should be clearly described.

Results and discussion: Authors may put results and discussion into a single section or show them separately.

Acknowledgement: This section includes a brief acknowledgment of people, grant details, funds

References: References should be listed in a numbered citation order at the end of the manuscript. DOIs and links to referenced articles should be added if available. Abstracts and talks for conferences or papers not yet accepted should not be cited. Examples Published Papers: 

1.K. Vijaya Kumar,R.Sridhar, D.Ravinder. Dielectric properties of Chromium substituted Nickel nano ferrites. International Journal of Nanoparticle Research, 2018; 2:6. DOI:10.28933/ijnr-2018-01-0302 
2.Muhammad Arshad Chaudhry, Liaqat Ali, Khalid Mahmood Ghauri, Javed Iqbal .Development and Characterization of Nanoparticle Metal Matrix Composites: (Al 2024-SiC NP). International Journal of Nanoparticle Research, 2018; 2:7. DOI:10.28933/ijnr-2018-04-1901

Tables and figures: Tables should be used at a minimum with a short descriptive title. The preferred file formats for Figures/Graphics are GIF, TIFF, JPEG or PowerPoint.

Publication fee: The authors will be contacted about the publication fee after a manuscript have been accepted.

Proofreading and Publication: A proof will be sent to the corresponding author before publication. Authors should carefully read the proof to avoid any errors and return the proof to the editorial office. Editorial office will publish the article shortly and send a notice to authors with the links of the paper.

Open Access

International Journal of Nanoparticle Research (indexing details) is a peer reviewed open access journal publishing research manuscripts, review articles, editorials, letters to the editor in Nanoparticle Research.

Peer Review

To ensure the quality of the publications, all submitted manuscripts will be peer-reviewed by invited experts in the field. The decisions of editors will be made based on the comments of the reviewers.

Rapid Publication

Time to first decision: within 2 days for initial decision without review, 18 days with review; Time to publication: Accepted articles will be published online within 2 days, and final corrected versions by authors will be accessible within 5 days.  More details....

Rapid Response Team

Please feel free to contact our rapid response team if you have any questions. Our customer representative will answer your questions soon.

International Journal of nanoparticle research

Loading